Page Comparison

In this section you will learn how to make the most out of your work in the Translation Editor. You may want to Here is an overview of the features we will be approaching. 

Image Modified 

We will be covering these topics (you can either scroll or jump directly to each chapter):

Image Modified 

Anchor
Document Document

Access project files (source, reference materials) and add external files to support your work or to communicate with the PM.

Options under this tab are:

All job files

Image Modified

In this section you can find your source files as well as the reference materials that have been provided for your job.

You can also include attachments (invoice, external documents) to support your work.

Working offline:

To continue your work offline you will need to configure an export with the relevant information for your task. Then, you will be able to import the file again and all the information will be loaded in the Editor.

Info
Note that as a user you might have some restrictions to work offline. If you have any doubts, check with your project manager or administrator the details of your user rights.

Export

Image Modified

A popup window will appear, allowing you to have a simple or extended view of your export.

Simple	Extended view
Working in the CAT Environment	Working in the CAT Environment Info title Trick! Before you perform the export, you can preview the structure you have created by clicking on the eye icon , on the top left corner of the extended view.

 

Simple view (export) 

Anchor
Simpleview Simpleview

By default, the system will always load the current view of your Editor. You can see these elements already loaded in the left side of the popup window.

There are also some preloaded export templates available (revisions report, offline translation and offline revision).

 

Some file formats may give you the possibility to change the way the information is displayed in the document. Word and excel exports will allow you to organize contents vertically and horizontally. Just mark all the elements you want to include in your export and the way you want to display them. xliff export does not allow any layouting at all. Info title Warning Never modify the structure of the file once it has been exported. Any modifications in the structure of the file will cause errors when importing the project back to the editor.

 

Extended view (Export) 

Anchor
Extendedview Extendedview

Here you can fully customize your export template according to your needs. Just select which fields you want to include in your export (they will all appear on the left side of the popup).

• In the settings area you will be able to name your file and set some relevant information about formatting.
  
• In the segment area you can include general information about the segments (which is usually displayed in the first column).
  
• Finally, the languages of the project will be displayed, not only your working languages but other possible target languages of the project. 
  

Info
title Reminder
Keep in mind that some of the categories only include existing information. This means that: if you want to be able to import comments to the system, you will need to include the field add comments, otherwise it wont be possible to retrieve that information during the import. if you are exporting the hits of your project resources, they will all be displayed in a static way.

 

You are now ready to start your work out of the CAT Editor! You will find all relevant information about how to fill any specific fields of your file under the page <WORKING Outside the CAT Editor>.

 

Import

Anchor
Import Import

--- SCREENSHOT

To successfully import your project, you need to recover your

Image Added

 

If your Project Manager has set you specific rights to work offline, you will be able to upload a file and send it to complete your assignment.

Either way, once you have submitted your file, you will need to go back to your job dashboard and set the job as complete.

To successfully import your project, you need to recover your previously exported file (filled with all the work you have performed offline).

Image AddedImage Added

Once you click on import,

a 

a popup window will appear allowing you to browse or drag and drop your desired file. Remember to select a valid file in order to avoid problems.

Image Added

Once the system has processed the files, a report with the changes will be generated. You may want to keep that information for latter use.

If not, you can just go on and accept the changes.

The editor will be loaded with your offline work.

 

Info
title Reminder
You can always decide to download your report afterwards. The report of your last import will always be available for download in the Import popup window. Image Added

--- SCREENSHOT

Set document as deliverable

Anchor
Deliverable Deliverable

Choose this option when you will be ready to deliver your work and complete your job.

--- SCREENSHOT

A popup window will allow you to submit the work available in the CAT Editor to your Project Manager. Alternatively, if your task required external work and your Project Manager has set you specific rights, you will be able to upload a file and send it to complete your assignment. Either way, once

 

If you were preforming a linguistic job it is very likely that you don't need to deliver any file, you will just need to change the status of your job in the Job Dashboard of the Wordbee Translator Platform.

Image AddedImage Added

Info
DTP and layouting jobs Image Added Users performing tasks that require to work on the file out of the translation interface will need to deliver their files first via the Set document as deliverable option. This popup window will allow you to submit the work available in the CAT Editor to your Project Manager.

 

Job Dashboard of the Wordbee Translator Platform 

Anchor
JobDashboard JobDashboard

Once you have submitted your file, you will need to go

back

to your job dashboard and set the job as complete.

--- SCREENSHOT

In the Translation Editor, you only have the possibility to run extensive Quality Assurance checks based on the profiles you have configured in the Word Bee platform. For more information about how to set them, go to the QA profiles page).

Clicking in the QA tab will open a popup window that will allow you to include some additional checks to the selected QA profile:

QA Checks 

--- SCREENSHOT

In the Translation Editor, you only have the possibility to run extensive Quality Assurance checks based on the profiles you have configured in the Word Bee platform. For more information about how to set them, go to the QA profiles page).

Clicking in the QA tab will open a popup window that will allow you to include some additional checks to the selected QA profile:

Once you run your QA checks, a report will be generated with different kinds of information:

Back to top

Preview 

Anchor
Preview Preview

--- SCREENSHOT

This option will allow you to see how the document you are translating looks like.

You have dedicated buttons to launch a preview of the source or the target file. 

Back to top

The Quicktask bar 

Anchor
quicktask quicktask

This bar gathers the most common functions you may use during your translation work.

Icon	Action	Description
	Save	Save your work manually or access the Autosave function by clicking the little arrow next to the save icon Activate/Disable Autosave Set Autosave interval (min. 5seconds)
	Refresh	Refresh without saving. This will allow you to see the work of your colleagues when in a collaborative scenario.
	Batch Actions	Apply changes to your working segments. Learn more about its possibilities in the actions page.
	Show/Hide formatting marks	Displays/Hides all font attributes and markup tags.
	Search and Replace	Quick access to the text-based search and replace function.
	Undo	Return to a previous version of your active segment.
	Undo (history)	List of the recent actions that have been performed in the active segment.

Working segments relate  relate to different scenarios. They can refer to:

Back to top

Page Navigation 

Anchor
Pagenavigation Pagenavigation

This bar will allow you to navigate throughout your document in a direct way.

By clicking on the the  icon  icon you will access the full view of the bar, which is the place where you will also customize how many segments you want to display per page.

Back to top

The Widgets Widgets 

Anchor
Widgets Widgets

To learn more about how this interactive panes contribute to your work, go to the the Widgets page page.

Back to top

The Editor Working space space 

Anchor
Editorspace Editorspace

In this area you will be performing your active work as a translator/reviser.

When the documents are imported imported into the CAT editor, the source text is automatically divided into into segments according  according to the text segmentation rules of your project (to know more about how to set them, go to the the Segmentation (SRX) Rules page page).

The header of the editor working space

The top part of the working space conforms the header, which gives access to the to the statistics panel Image Modified (top left corner) and the the column properties Image Modified(top right corner).

This area also contains the headers of each column, where the titles gives information about information about the nature of the content of the rows below.

Right below the the Image Modifiedicon, we can find the column containing containing segment references (Column Zero) which may display additional meta information (we will see the details in the the segment view). 

The columns

Image Modified

In the editor, the segments will always be displayed in columns, which you can hide or display to your own needs. 

Column (re)order:

 Next  Next to the statistics icon and by default, you will have the following column sequence:

• the first column to  to be displayed will be be the source text, which is  is marked with a dot.

Then other columns will follow:

• The The second column will  will usually be the target text you will be working on and
• other additional columns may be loaded, depending on your predefined layout. For instance: 
  
  • other existing target languages (translation layout) or
  • the revisions column (revisions layout).

Column management

Always keep in mind that you can decide:

• which columns you want to have directly available or
• reorganize the columns to suit your needs and move them move them right or left.

You can do this in several ways:

One-by-one (column options)	one-by-ona and All at once (column manager)
on the top right icon of each of them (at header level)	available under the top right corner of the working space
Options available: Remove column Move left/right  Change language	Options available: add language column (rolldown menu) column manager with all possible options available Info title Reminder + Drag and drop to set in a specific order

Segment view
 

Image Modified

Each row represents a segment. Anytime you open one segment, it would pop up from the editor letting you know that you are in in editing mode.Then  Then you can modify the text or leave comments to other users, for instance.

Each segment is divided in different parts. In this case, we will take the example above, which has 4 parts.

Part 1. Column Zero 

Icons	Description
	Segment number
	Labels
	Split

Part 2. Source text text 

Contains the source text. Locked Locked. Only editable if user has specific rights.

Part 3. Language status (for working target) 

Values	Description
	Neutral none
	OK
	BAD

Part 4. Language text (for working target) 

Icons	Values / Options	Description
		Segment panel (advanced)
		Segment formatting
	No comments (default) Has comments	Comments will be displayed in the Timeline widget
	No bookmarks (default) Blue bookmark Red bookmark	Pin segments to highlight something
	Unlocked (default) Locked	Indicates the possibility to make modifications in a segment. Unlocked: in working target Locked: in other target (if any)
	NEUTRAL (default) OK BAD	By default: NEUTRAL
	Exact Pre-Translation Fuzzy Pre-Translation	Displays pre-translation hits (if any)
	QA Errors Warning

Key elements

Icon	Description
Image Removed	Access to document files, import/export options and set document as deliverable.
Image Removed	Access QA Checks, profiles and QA results.
Image Removed	Access to Preview options
Image Removed	Access to Quicktask bar
Image Removed	Access the page navigation
Working in the CAT Environment Working in the CAT Environment	Access to The Widgets
Image Removed	The Editor Workspace

Document: the tab for file management

Image Removed

Access project files (source, reference materials) and add external files to support your work or to communicate with the PM.

Options under this tab are:

All job files

Image Removed

In this section you can find your source files as well as the reference materials that have been provided for your job.

You can also include attachments (invoice, external documents) to support your work.

Working offline:

To continue your work offline you will need to configure an export with the relevant information for your task. Then, you will be able to import the file again and all the information will be loaded in the Editor.

Export

Image Removed

A popup window will appear, allowing you to have a simple or extended view of your export.

By default, the system will always load the current view of your Editor. You can see these elements already loaded in the left side of the popup window.

There are also some preloaded export templates available (revisions report, offline translation and offline revision).

Some file formats may give you the possibility to change the way the information is displayed in the document. Image Removed Word and excel exports will allow you to organize contents vertically and horizontally. Just mark all the elements you want to include in your export and the way you want to display them. xliff export does not allow any layouting at all. Info title Warning Never modify the structure of the file once it has been exported. Any modifications in the structure of the file will cause errors when importing the project back to the editor.

Here you can fully customize your export template according to your needs. Just select which fields you want to include in your export (they will all appear on the left side of the popup).

• In the settings area you will be able to name your file and set some relevant information about formatting.
  Image Removed
• In the segment area you can include general information about the segments (which is usually displayed in the first column).
  Image Removed
• Finally, the languages of the project will be displayed, not only your working languages but other possible target languages of the project. 
  Image Removed

You are now ready to start your work out of the CAT Editor! You will find all relevant information about how to fill any specific fields of your file under the page <WORKING Outside the CAT Editor>.

Import

--- SCREENSHOT

To successfully import your project, you need to recover your previously exported file (filled with all the work you have performed offline).

Once you click on import, a  popup window will appear allowing you to browse or drag and drop your desired file. Remember to select a valid file in order to avoid problems.

Once the system has processed the files, a report with the changes will be generated. You may want to keep that information for latter use. If not, you can just go on and accept the changes.

The editor will be loaded with your offline work.

Set document as deliverable

--- SCREENSHOT

Choose this option when you will be ready to deliver your work and complete your job.

--- SCREENSHOT

A popup window will allow you to submit the work available in the CAT Editor to your Project Manager. Alternatively, if your task required external work and your Project Manager has set you specific rights, you will be able to upload a file and send it to complete your assignment. Either way, once you have submitted your file, you will need to go back to your job dashboard and set the job as complete.

Back to top