In order to configure the plugin you require the web location of a Beebox server, a project key and credentials. Please see the Prerequisites page.
Connection to Beebox
Once you have all connection details, proceed as follows:
- Open your AEM site in administrative mode.
- Press Beebox Translation Console, following screen would be shown.
- Press Settings ->Wordbee > Wordbee Beebox configuration following screen would come up.
...
- Select the source language as configured in Beebox project and fill all Beebox connection details as shown below.
- Providing proxy details is optional.
- Press Test, to check AEM site connection with Beebox should you have entered correct details Success message would be shown.
- Finally, press Submit.
The connection setting page shows these fields:
Field | Description |
|---|---|
| Server Url | A URL pointing to the Beebox server. Supplied by the Beebox manager: Prerequisites |
| Project Key | A key identifying a Beebox project. Supplied by the Beebox manager. |
| Login | A login to access the Beebox. Supplied by the Beebox manager. |
| Password | A password to access the Beebox. Supplied by the Beebox manager. |
| Source language | The source language that is configured in your AEM site and Beebox project. |
If a user wants to set proxy, the following details needs to be provided:
- Host: IP address of the proxy server.
- Port: Port on which the proxy server needs to run.
The proxy server can be authenticated by providing the authentication details :
as the username and its password.
| Warning | ||
|---|---|---|
| ||
There may be many reasons why a connection to the Beebox fails. See Troubleshooting. |
...
source path: /content/geometrixx-outdoors-4/en/men
target path: /content/geometrixx-outdoors-4/fr/men
2. If path indicator is specified as fr_FF, the target path would be as follows:
source path: /content/geometrixx-outdoors-4/en/men
target path: /content/geometrixx-outdoors-4/fr/fr_FF/men
NOTE : Path indicator is optional and one time configurable. It is advised not to change it as we will be consdering source lang through path. Once it is configured, translated pages will be created in the path configured.
- This needs to be done if the user wants to save the base url of the site. It can be configured from
...